Zuko Engineers
 
 
+91- 9315101427 info@doorclosersindia.com
PRODUCTS
 
Model -FS-80
Product data

Door size 800x2000mm
Max door weight 80 Kg
Dimension of appearance 250x110x46
Double action door
Section speed adjustment valve
Application All metal & Glass Door

Technical data
» Stainless steel cover plate.
» Filled with high quality anti-icing hydraulic oil ensuring and flexible operation of
Mechanical parts at different temperatures.
» Door opening angle at 106° at your options.
» 90° stop device or non-stop device at your option.
» With single closing speed adjusting valves at 90°~0° to match different closing purposes.
» General design is suitable for opening doors with left/right hand and single/double
opening, accessories are available.
Model -FS-100
Product data

Door size 900X2000mm
Max door weight 100 Kg
Dimension of appearance 250x110x50
Double action door
Section speed adjustment valve
Application All metal & Glass Door

Technical data
» Stainless steel cover plate.
» With height adjustment feature.
» Filled with high quality anti-icing hydraulic oil, ensuring smooth and flexible operation
of mechanical parts at different temperatures.
» Door opening angel at 106° at your option.
» 90° Stop device or non-stop device at your option.
» With double closing speed adjusting valves at 90°~0° to match different closing urposes.
» General design is suitable for opening doors with left/right hand and single/double
Model -FS-150
Product data

Door size 1200X2300mm
Max door weight 150 Kg
Dimension of appearance 310x109x43
Double action door
Section speed adjustment valve
Application All metal & Glass Door

Technical data
» Stainless steel cover plate.
» With height adjustment feature.
» Filled with high quality anti-icing hydraulic oil, ensuring smooth and flexible operation
of mechanical parts at different temperatures.
» Door opening angel at 130° at your option.
» 90° stop device or non-stop device at your option.
» With double closing speed adjusting valves at 130°~0° to match different closing Purposes.
» General design is suitable for opening doors with left/right hand and single/double opening, accessories are available.
Top Plate View
SUGGESTIONS ON FLOOR SPRING SELECTION
» Selection of different models of floor spring is mainly based on glass door weight.
» Calculation of glass weight : according to national standard, 1mm thick common and toughened glass is 2.5 kg per square meter. As to 12mm thick, 2.3m high and 1m wide glass door commonly used in the country at present, the weight shall be 2.3x1x12x2.5=69kg.
» The weight of the entire door can be got by adding up the weight of all accessories and the weight of glass.
» If heavy-duty floor spring is chosen for a light-weight glass door, the cost will increase, and you cannot obtain good opening effect because it is heavy-duty.
» If floor spring with inadequate weight bearing is chosen to reduce project costs, it will directly influence service life of floor spring
» For an outside door, taking wind power into consideration, twin-cylinder floor spring should be chosen regardless of door sizes. This is because twin-cylinder floor spring is better than Single-cylinder floor spring.
» In cold area, floor spring with anti-icing hydraulic oil injected should be chosen, so as to prevent malfunction of floor spring at a very low temperature.


 ACCESSORIES
   
Dimensions can be changed at any moment.
 
Home   |   About   |   Products   |   FAQs   |   Contact   |   Site Map
© Zuko Enginners - All Rights Reserved.